跳至主要内容

坑爹的华为EMUI 10.1.0.168升级记

周五回家刷到华为P30的升级中心有新的Android安全补丁,版本号10.1.0.168,习惯性的点立即升级。


周六早上出门回公司加班,在楼下手机提示APN被修改,问是否改回默认设置?因为点了否后悔了大半天。进地铁站,发现手机没法连上手机流量,关机重启,关闭移动数据后重新打开,切换飞行模式后再找开,怎么弄手机都没法连上网。一下子慌了,手机没网络简直是寸步难行,打开大都会加载不了二维码,压根不能刷码进站。庆幸背包出门,包里还带了钱包,在售票机买票进站,暂时解决了问题。但在地铁里拿着一个变成砖头的手机,眼睁睁地看着边上的人玩手机,那感觉可真酸爽。

好不容易到了办公室,取出SIM卡换卡槽等物理方式也不行。想起出门前的APN提示,打开手机流量的APN设置,发现APN的列表里是空的,尝试新增CMNET APN,但貌似没能生效。如此这般多次反复设置均不能生效,心里已经打算晚上回家把手机的微信信息和文件备份到电脑上,把手机重新恢复出厂设置看能否解决了。

放狗搜了一圈,看见有个设置CMTDS APN以加速流量网络的方法,抱着死马权当活马医的想法,设置了一下,然后选定APN为CMTDS,然居把问题解决了。坑爹的菊厂,肯定是升级包没有仔细的测试,把俺的APN设置给覆盖掉了。😀



评论

此博客中的热门博文

解决OpenWRT安装第三方包Incompatible with the architectures configured错误

 起因 起了把家里路由器更新到新版本OpenWRT的念头很久了,周末终于克服自己的懒病,下载了OpenWRT 19.07.4的安装包,更新Linksys WRT1900ACS路由器的系统。 修改了IP地址,把Wifi打开后,驾轻就熟地修改了相关的配置,增加了第三方源,准备开始安装你懂的SS和ChinaDNS等组件。没想到往常屡试不爽的opkg install命令返回了安装失败提示: Incompatible with the architectures configured 仔细比对了所有的配置,确认没有错误,但是安装新增的第三方包时总是报错。 解决方法 试了N多种方法,还是不行,正准备放弃装回原来ROM时,突然发现运行opkg print-architecture返回的CPU架构型号是 arch all 1 arch noarch 1 arch arm_cortex-a9_vfpv3-d16 10 比原来系统打印出来的架构型号多了一个d16,而第三方源的库里貌似没有arm_cortex-a9_vfpv3-d16这样一个型号的源,尝试修改/etc/opkg.conf文件,把原来CPU型号列表增加不带d16行。 arch all 1 arch noarch 1 arch arm_cortex-a9_vfpv3 8 arch arm_cortex-a9_vfpv3-d16 10 再运行opkg install,包装成功。

64位OEL 6安装Oracle RCU报“libXext.so.6: cannot open shared object file: No such file or directory”的解决方法

在64位的Oracle Enterprise Linux 6上时报“ libXext.so.6: cannot open shared object file: No such file or directory ”的错误,已经装了64位x11相关的包,可见是缺少32位的包引起的。 1.libXext.so.6错误信息如下: 无法使用位置 /home/ecm/oinstall/rcuHome/rcu/log/logdir.2011-12-26_09-54/rcu.log 初始化日志记录程序 使用以下位置初始化日志记录程序: /tmp/logdir.2011-12-26_09-54/rcu.log Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/ecm/oinstall/rcuHome/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory     at java.lang.ClassLoader$NativeLibrary.load(Native Method)     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1806)     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1702)     at java.lang.Runtime.load0(Runtime.java:770)     at java.lang.System.load(System.java:1003)     at java.lang.ClassLoader$NativeLibrary.load(Native Method)     at java.lang.ClassLoader.loadLibrar...

Installing RHEL EPEL Repo on Centos 5.x or 6.x

习惯了用yum来安装东西,试了下这篇文章提到的做法workable,再做一次搬运工。 原文出处: http://www.rackspace.com/knowledge_center/article/installing-rhel-epel-repo-on-centos-5x-or-6x Authored by: Rackspace Support How to install RHEL EPEL repository on Centos 5.x or 6.x The following article will describe how to configure a CentOS 5.x-based or Centos 6.x-based system to use Fedora Epel repos and third party remi package repos. These package repositories are not officially supported by CentOS, but they provide much more current versions of popular applications like PHP or MYSQL. Install the extra repositories The first step requires downloading some RPM files that contain the additional YUM repository definitions. The instructions below point to the 64-bit versions that work with our Cloud Server instances. Centos 5.x wget http://dl.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm wget http://rpms.famillecollet.com/enterprise/remi-release-5.rpm sudo rpm -Uvh remi-release-5*.rpm epel...